SGT6-12 CNC Rebar

Relate Equipment/Accessories

It is composed of straightening part, feeding part, cutting part, counting part and electric control part.

Straightening part

Straightening part is driven by 7.5kW electric motor. Belt drives straightening box to straight. Depending on stagger straightening wheels and rotation of straightening box, straightening box removes stress and pushes wires to operate. It adjusts wires’ straightness by taking advantage of the forward and backward of straightening wheel.

Feeding part

Feeding part is composed of two pairs of horizontal and vertical rollers.

Cutting part

1. CNC panel sets the needed rebar length and starts the machine. Midget universal relay controls the magnetic one-way valve, and output hydraulic oil reaches pressure of 6-8MPa, and pushes oil cylinder plunger and cutter forward, and cut the wires.
2. When wires get through the counter wheel, it sends signal to counter which will power off automatically when reaching the specified cutting quantity, and cut off the circuit and automatic stop. Press reset button for restarting.

Counting part

Counting part is composed of a pair of rollers with high hardness of HRC58-62 and good wear resistance. Lower wheel has V opening, and upper wheel connects meter measurer.